Quality Evaluation of an RFID Parking Desktop Application Using ISO 9126

Authors

  • Muhammad Fitra Abdi Tama Politeknik Negeri Jember Author
  • Nadila Dewi Mustika Politeknik Negeri Jember Author
  • Bayu Adi Saputro Politeknik Negeri Jember Author
  • Dhony Manggala Putra Politeknik Negeri Jember Translator

DOI:

https://doi.org/10.69533/informatech.volume3number2.692

Keywords:

Apache JMeter, ISO 9126, RFID parking system, software quality testing, System Usability Scale

Abstract

Software quality assurance is essential before an RFID-based parking application is released for daily operation. This study evaluates a Java desktop parking application that uses RFID identification and a MySQL database hosted on XAMPP, guided by the ISO 9126 quality model. The database access path was tested with Apache JMeter through a JDBC request that queries the parking history table under ten concurrent virtual users (40 samples); this test gives partial evidence on functionality, reliability, and efficiency but does not exercise the graphical interface or the RFID reader. Usability was measured with the System Usability Scale (SUS) completed by 16 respondents who all held the operator role. All 40 JMeter requests succeeded (0% error rate), with an average response time of 15 ms, a median of 5 ms, a 95th percentile of 36 ms, a maximum of 75 ms, and a throughput of 1.2 requests per second. In contrast, the mean SUS score was 49.69 (SD = 4.17), which is below the widely used benchmark of 68 and below the “OK” adjective anchor. Because this result comes from 16 operators who use the application daily, it indicates that the operator interface needs improvement before wider deployment, whereas the technical results are limited to data retrieval under light load and do not validate the application as a whole.

Downloads

Download data is not yet available.

References

F. Tannujaya, F. Hasanah, and A. T. Nugroho, “Design and realization of parking system prototype using RFID based microcontroller with reservation service via website for four-wheel vehicle,” in Proc. 2nd Int. Seminar Sci. Appl. Technol. (ISSAT 2021), Adv. Eng. Res., vol. 207, Atlantis Press, 2021.

M. Hanief, L. H. Nugroho, and M. Galina, “Low cost RFID-based security system for parking lots,” Jurnal Media Elektro, vol. 11, no. 2, 2022, doi: 10.35508/jme.v0i0.8126.

T. J. Eing and I. F. Kamsin, “Touchless parking payment system using RFID technology integrated FinTech payment solutions,” J. Appl. Technol. Innov., vol. 7, no. 3, 2023.

Software Engineering – Product Quality – Part 1: Quality Model, ISO/IEC 9126-1:2001, International Organization for Standardization, Geneva, Switzerland, 2001.

M. R. Firdaus, Y. Alkhalifi, D. Ismunandar, and O. Kurniawan, “Analisis kualitas website portal media online Milenianews.com menggunakan standar ISO 9126,” INTI Nusa Mandiri, vol. 19, no. 2, 2025, doi: 10.33480/inti.v19i2.6218.

D. A. Suryadi and E. Sulistiyani, “Evaluation of information quality using ISO/IEC 25010:2011 (case research: Menu Harianku application),” Int. J. Innov. Enterp. Syst., vol. 6, no. 2, pp. 143–156, Jul. 2022, doi: 10.25124/ijies.v6i02.167.

A. Annisa, M. Ardiana, P. N. Rahayu, T. Brian, and M. A. Jami’in, “Performance evaluation of web applications using JMeter load testing for server capacity and response efficiency,” J. Appl. Informatics Comput., vol. 10, no. 1, 2026, doi: 10.30871/jaic.v10i1.11840.

A. N. Rachman et al., “Load testing-based performance evaluation of the SiUKT API system,” J. Intell. Syst. Technol. Informatics, vol. 2, no. 1, pp. 22–29, Mar. 2026, doi: 10.64878/jistics.v2i1.89.

I. Indrianto, “Performance testing on web information system using Apache JMeter and BlazeMeter,” Jurnal Ilmiah Ilmu Terapan Universitas Jambi, vol. 7, no. 2, pp. 138–149, Dec. 2023, doi: 10.22437/jiituj.v7i2.28440.

H. Alnuhait et al., “Web application performance assessment: A study of responsiveness, throughput, and scalability,” Int. J. Adv. Appl. Sci., vol. 11, no. 9, pp. 214–226, 2024, doi: 10.21833/ijaas.2024.09.023.

J. Brooke, “SUS: A ‘quick and dirty’ usability scale,” in Usability Evaluation in Industry, P. W. Jordan, B. Thomas, B. A. Weerdmeester, and I. L. McClelland, Eds. London, U.K.: Taylor & Francis, 1996, pp. 189–194.

A. Bangor, P. Kortum, and J. Miller, “Determining what individual SUS scores mean: Adding an adjective rating scale,” J. Usability Stud., vol. 4, no. 3, pp. 114–123, May 2009.

M. Hyzy et al., “System Usability Scale benchmarking for digital health apps: Meta-analysis,” JMIR mHealth uHealth, vol. 10, no. 8, p. e37290, Aug. 2022, doi: 10.2196/37290.

O. Suria, “A statistical analysis of System Usability Scale (SUS) evaluations in online learning platform,” J. Inf. Syst. Informatics, vol. 6, no. 2, pp. 992–1007, Jun. 2024, doi: 10.51519/journalisi.v6i2.750.

Y. Thamilarasan et al., “Enhanced System Usability Scale using the software quality standard approach,” Eng. Technol. Appl. Sci. Res., vol. 13, no. 5, pp. 11779–11784, Oct. 2023, doi: 10.48084/etasr.5971.

A. F. Cobantoro and F. G. Anugra, “Designing parking system-based VB.Net and MySQL using Radio Frequency and Identification (RFID),” Volt: J. Ilm. Pendidik. Tek. Elektro, vol. 2, no. 2, pp. 109–116, Oct. 2017, doi: 10.30870/volt.v2i2.2009.

J. R. Lewis, “The System Usability Scale: Past, present, and future,” Int. J. Hum.–Comput. Interact., vol. 34, no. 7, pp. 577–590, 2018, doi: 10.1080/10447318.2018.1455307.

A. Bangor, P. T. Kortum, and J. T. Miller, “An empirical evaluation of the System Usability Scale,” Int. J. Hum.–Comput. Interact., vol. 24, no. 6, pp. 574–594, 2008, doi: 10.1080/10447310802205776.

J. R. Lewis and J. Sauro, “Item benchmarks for the System Usability Scale,” J. Usability Stud., vol. 13, no. 3, pp. 158–167, May 2018. [Online]. Available: https://uxpajournal.org/wp-content/uploads/sites/7/pdf/JUS_Lewis_May2018.pdf

J. Brooke, “SUS: A retrospective,” J. Usability Stud., vol. 8, no. 2, pp. 29–40, Feb. 2013.

S. Andjelic, S. Obradovic, and B. Gacesa, “A performance analysis of the DBMS – MySQL vs PostgreSQL,” Commun. – Sci. Lett. Univ. Zilina, vol. 10, no. 4, pp. 53–57, 2008, doi: 10.26552/com.C.2008.4.53-57.

P. Kortum and C. Z. Acemyan, “How low can you go? Is the System Usability Scale range restricted?,” J. Usability Stud., vol. 9, no. 1, pp. 14–24, 2013.

Z. Sharfina and H. B. Santoso, “An Indonesian adaptation of the System Usability Scale (SUS),” in Proc. Int. Conf. Adv. Comput. Sci. Inf. Syst. (ICACSIS), 2016, pp. 145–148.

C. Kartiko, “Evaluasi kualitas aplikasi web pemantau menggunakan model pengujian perangkat lunak ISO/IEC 9126,” J. Nas. Tek. Elektro Teknol. Inf. (JNTETI), vol. 8, no. 1, pp. 16–23, Feb. 2019. [Online]. Available: https://jurnal.ugm.ac.id/v3/JNTETI/article/download/2611/732

A. Vetro, N. Zazworka, C. Seaman, and F. Shull, “Using the ISO/IEC 9126 product quality model to classify defects: A controlled experiment,” in Proc. 16th Int. Conf. Eval. Assess. Softw. Eng. (EASE 2012), 2012, pp. 187–196.

Downloads

Published

2026-12-11

How to Cite

Quality Evaluation of an RFID Parking Desktop Application Using ISO 9126. (2026). Jurnal Ilmiah Informatika Dan Komputer, 3(2), 206-214. https://doi.org/10.69533/informatech.volume3number2.692